• Bar Stock
    Nominal Stock Allowances:
    O.D. up to 2.25".........060" I.D. and O.D.
    O.D. 2.25" to 3.25".....080" I.D. and O.D.
    O.D. 3.25" to 6.00".....100" I.D. and O.D.
    O.D. 6.00" to 8.00".....125" I.D. and O.D.

    Other Lengths, Alloys and Sizes Available Upon Request.
    All Weights Shown Are Approximate Weights.

  • Bar Stock
    Nominal Stock Allowances:
    O.D. up to 2.25".........060" I.D. and O.D.
    O.D. 2.25" to 3.25".....080" I.D. and O.D.
    O.D. 3.25" to 6.00".....100" I.D. and O.D.
    O.D. 6.00" to 8.00".....125" I.D. and O.D.

    Other Lengths, Alloys and Sizes Available Upon Request.
    All Weights Shown Are Approximate Weights.

  • Will finish to dimensions shown.
    6-1/2 inch Lengths

  • Will finish to dimensions shown.
    6-1/2 inch Lengths

  • I.D. and O.D. will finish to dimensions shown.
    Thickness (±.0025")

  • Width and length will finish to dimensions shown.

  • Will finish to dimensions shown.
    Some sizes available in 6-1/2 inch lengths.

  • Will finish to dimensions shown.

  • Wear Plate
    Nominal Stock Allowances:
    All Thicknesses……… .085"
    Widths up to 5"……… .085"
    5" and over…………… .110"

    Maximum deviation from straightness due to twist, waviness or full camber is 1/4" in any 5 feet.

    Width flatness to be within stock allowances.

    Other Lengths, Alloys and Sizes Available Upon Request.

    All Weights Shown Are Approximate Weights.

  • Made to Order Special Sizes and Alloys are Available Upon Request, Please Inquire.
    Other Lengths Available Upon Request.

    Typical Properties:
    C93200 (SAE 660) Bronze Bars Chemical Composition.......

  • Copper....... 81.0 - 85.0%
  • Tin..............6.3-7.5%
  • Lead...........6.0-8.0%
  • Zinc ...........2.0-4.0%

    Tensile Strength.......................35,000 PSI
    Yield Strength.................................20,000 PSI
    Elongation in 2 inches......................10%
    Brinell Number at 500 KG Load.........65
    Comparable Alloy Specifications:......C93200; SAE 660
    Common Continuous Cast Manufacturing Specifications: ASTM B505;QQ-C 390B, Type III

    Not to be used for specification purposes.

    Nominal Stock Allowances:
    O.D. up to 4".........1/32" I.D. and O.D.
    O.D. 4" to 5"..........1/16" I.D. and O.D.
    O.D. 5" +...............3/32" I.D. and O.D.