Fay Industries provides the metal working industries globally with steel products and services.

Home|About Us|Product Catalog|Value Added Services|Industries Served|Metal News|Request for Quote|Contact Us

Products & Services

Forged Bar and Plate

Alloy Bar and Plate

Carbon Bar, Plate, Tubing and Structural

Nickel Alloy Bar, Tube, Pipe and Plate

Aluminum and Stainless Bar, Tube, Pipe and Plate

Tool Steel Bar and Plate

Red Metals - Bronze, Copper and Brass

Saw Cutting Services

 

Search Catalog:
GO
Use a (*) to broaden your search results

 

Fay proudly
operates under
MIL-I-45208 A guidelines

Fay Industries Facebook Page

Fay Industries Linkedin Page

Made in America

 

All Categories > Carbon Bars, Plates, Tubing and Structural > Structural Steel > HR A36 Channels Bar Sizes > Size (A x B x C) 1 x 1/2 x 1/8  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Size (A x B x C) 1 x 1/2 x 1/8, HR A36 Channels Bar Sizes



Structural Shapes

Listed on the following pages are shapes commonly carried in stock. The American Iron and Steel Institute has established a designation system for structural shapes, which has been adopted by steel producers. In the column headed "AISI Designation", a letter or letters precedes the size and weight per foot. For example, C3 X 4.1 is the AISI designation for a 3" x 4.1# Standard Structural Channel.

"W" shapes are doubly-symmetric wide flange shapes used as beams or columns whose inside flange surfaces are substantially parallel. A shape having essentially the same nominal weight and dimensions as a "W" shape listed in the tabulation but whose inside flange surfaces are not parallel may also be considered a "W" shape having the same nomenclature as the tabulated shape, provided its average flange thickness is essentially the same shape as the flange thickness of the "W" shape.

"S" shapes are doubly-symmetric shapes produced in accordance with dimensional standards adopted in 1896 by the Association of American Steel Manufacturers for American Standard beam shapes. The essential part of these standards is that the inside flange surfaces of American Standard beam shapes have approximately a 16 2/3% slope.

"M" shapes are doubly-symmetric shapes that cannot be classified as "W", "S", or bearing pile shapes. (Although not included in the standard nomenclature tabulation, bearing piles are doubly-symmetric wide flange shapes whose inside flange surfaces are essentially parallel and whose flange and web have essentially the same thickness.)

"C" shapes are channels produced in accordance with dimensional standards adopted in 1896 by the Association of American Steel Manufacturers for American Standard channels. The essential part of these standards is that the inside flange surfaces of American Standard channels have approximately a 16 2/3% slope.

"MC" shapes are channels that cannot be classified as "C" shapes.

Stock Lengths 20' and 30'





Specifications  · Analysis  · Applications  · Mechanical Properties  · Weldability

Specifications

A

1 in

B

1/2 in

C

1/8 in

Estimated Weight per Foot

.84 lb

Estimated Weight 20-Ft. Length

16.8 lb

Estimated Weight 30-Ft. Length

25.2 lb


Analysis
Carbon .26 Max.
Phosphorus .04 Max.
Sulphur .05 Max.




Applications
For use in riveted, bolted, or welded construction of bridges and buildings, and for general structurals purposes.



Mechanical Properties
ASTM A 36 requirements are:
Tensile Strength - 58.000/80.000 psi
Yield Point - 36,000 Min. psi
Elongation in 8" - 20% Min. (Subject to a deduction from trie above percentage of elongation for thicknesses under 5/16" and over 3/4".)



Weldability
These shapes are easily welded by all the welding processes, and the resultant welds and joints are of extremely high quality. The grade of welding rod to be used depends on thickness of section, design, service requirements, etc.



 DOWNLOADS 

Tolerances - Carbon and Alloy Bars
(PDF, 358KB)



 Precision Saw Cutting 


Cold Saw Cuts_On Saw_1
Precision Saw Cutting

 Custom Sizes 


New Custom Size Photo
Custom Sizes

 Weight Tables 


Rounds
Round Bars


Squares
Square Bars

more available ..


Site created by ThomasNet Web Solutions, a division of ThomasNet.com