Fay Industries provides the metal working industries globally with steel products and services.

Home|About Us|Product Catalog|Value Added Services|Industries Served|Metal News|Request for Quote|Contact Us

Products & Services

Forged Bar and Plate

Alloy Bar and Plate

Carbon Bar, Plate, Tubing and Structural

Nickel Alloy Bar, Tube, Pipe and Plate

Aluminum and Stainless Bar, Tube, Pipe and Plate

Tool Steel Bar and Plate

Red Metals - Bronze, Copper and Brass

Saw Cutting Services

 

Search Catalog:
GO
Use a (*) to broaden your search results

 

Fay proudly
operates under
MIL-I-45208 A guidelines

Fay Industries Facebook Page

Fay Industries Linkedin Page

Made in America

 

All Categories > Aluminum and Stainless Bars, Tubes, Pipes and Plates > Stainless Steel > Cold Finished Stainless Steel > 304 - Cold Finished Stainless Steel > Types 304 Annealed Stainless Steel - Sheets > Size 36 x 96 x .018  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Size 36 x 96 x .018, Types 304 Annealed Stainless Steel - Sheets



The analysis of Type 304 is similar to that of Type 302, except that Type 304 is modified by lowered carbon content This provides good resistance to corrosion in welded construction where subsequent heat treatment is not practicable. Bars and Plates are available not only in the regular Type 302 and 304 analyses, but also in an extra low carbon analysis, known as Type 304L. The advantage of this analysis is that it precludes any harmful precipitation in the 800°-1500°F range, such as might otherwise occur in welding heavier sections.

UNS S30200. S30400, S30403

No. 2B Finish — Bright Cold Rolled

No. 2D Finish — DuU Cold Rolled

No. 3 Finish — Polished One Side

No. 4 Finish — Polished One Side

Physical Condition A





Specifications  · Analysis  · Specifications  · Applications  · Corrosion Resistance  · Resistance to Scaling  · Mechanical Properties  · Machinability  · Weldability  · Forming  · Forging  · Annealing

Specifications

Thickness

.018 (26 Ga.) in

Width

36 in

Length

96 in

Estimated Weight per Sq. Ft.

.756 lb

Estimated Weight per Seet

18.1 lb


Analysis
304
Carbon .08 Max.
Manganese 2.00 Max.
Phosphorus .040 Max.
Sulphur .030 Max.
Si. 1.00 Max.
Cr.18.00/20.00
Ni. 8.00/10.50
Cu. .75 Max.
Mo. .75 Max.




Specifications
The following specifications are generally applicable:
Sheets & Plates: MIL-S-5059, AMS 5513, ASTM A 167, ASTM A 240
Bars: MIL-S-7720, QQ-S-763, AMS 5639, ASTM A 276, ASTM A 479



Applications
Used where corrosion resistance and good mechanical properties are primary requirements. These grades are widely accepted in such industries as dairy, beverage, and other food products where the highest degree of sanitation and cleanliness is of prime importance. Parts for handling acetic, nitric, and citric acids, organic and inorganic chemicals, dyestuffs, crude and refined oils, etc., are fabricated from this material. Because of its lack of magnetism it is highly desirable for instruments. It is also widely used for architectural trim. Type 302 sheets are used in aircraft applications where corrosion resistance is required, but where gas or arc welding and elevated temperatures are not involved. Type 304, as noted above, finds particular use in applications requiring welding.



Corrosion Resistance
Types 302 and 304 show good resistance to corrosion. They are highly resistant to strong oxidizing acids, such as nitric acid, and resist attack by a wide variety of organic and inorganic chemicals. Maximum corrosion resistance is obtained in the annealed condition. Intergranular corrosion may occur when material is heated within or cooled through the range of 800° to 1500°F.



Resistance to Scaling
Excellent scale resistance at temperatures up to 1600°F in continuous service. Chromium-nickel grades have a high coefficient of expansion, which should be considered in designing.



Mechanical Properties
Applicable specifications require the following properties of sheets in the annealed condition:
304
Tensile Strength - 100.00 psi Max.
Elongation in 2"( 0.15" Thick and Under) - 40% Min.
Elongation in 2"( 0.16" Thick to .030") - 40% Min.
Elongation in 2"( 0.031" Thick and Over) - 40% Min.
Elongation in 2" - 17% Min.
In practice, annealed sheets and plates will average as follows:
Tensile Strength - 90.00 psi
Yield Strength - 40,000 psiMin.
Elongation in 2" - 50% Min.
Rockwell "B" Hardness 85.0




Machinability
Types 302 and 304 have a machinability rating of approximately 45% with 1212 rated as 100%. Surface cutting speed on automatic screw machines is approximately 75 feet per minute.



Weldability
Easily welded by all the commercial processes except forge or hammer welding. The resulting weld has good toughness and ductility. Annealing is recommended after welding to maintain maximum corrosion resistance.



Forming
These grades have very good drawing and stamping properties.



Forging
Forge between 2100° and 2350°F. Do not forge below 1700°F



Annealing
Annealing range is between 1850° and 2050°F. Cool rapidly
Water should be used for heavier sections; air for lighter sections.
The stress relieving range is between 400° and 750 °F.




 Precision Saw Cutting 


Cold Saw Cuts_On Saw_1
Precision Saw Cutting

 Custom Sizes 


New Custom Size Photo
Custom Sizes

 Weight Tables 


Rounds
Round Bars


Squares
Square Bars

more available ..


Site created by ThomasNet Web Solutions, a division of ThomasNet.com