-
Bar Stock
Nominal Stock Allowances:
O.D. up to 2.25".........060" I.D. and O.D.
O.D. 2.25" to 3.25".....080" I.D. and O.D.
O.D. 3.25" to 6.00".....100" I.D. and O.D.
O.D. 6.00" to 8.00".....125" I.D. and O.D.
Other Lengths, Alloys and Sizes Available Upon Request.
All Weights Shown Are Approximate Weights. -
Bar Stock
Nominal Stock Allowances:
O.D. up to 2.25".........060" I.D. and O.D.
O.D. 2.25" to 3.25".....080" I.D. and O.D.
O.D. 3.25" to 6.00".....100" I.D. and O.D.
O.D. 6.00" to 8.00".....125" I.D. and O.D.
Other Lengths, Alloys and Sizes Available Upon Request.
All Weights Shown Are Approximate Weights. -
Will finish to dimensions shown.
6-1/2 inch Lengths -
Will finish to dimensions shown.
6-1/2 inch Lengths -
I.D. and O.D. will finish to dimensions shown.
Thickness (±.0025") -
Width and length will finish to dimensions shown.
-
Will finish to dimensions shown.
Some sizes available in 6-1/2 inch lengths. -
Will finish to dimensions shown.
-
Wear Plate
Nominal Stock Allowances:
All Thicknesses……… .085"
Widths up to 5"……… .085"
5" and over…………… .110"
Maximum deviation from straightness due to twist, waviness or full camber is 1/4" in any 5 feet.
Width flatness to be within stock allowances.
Other Lengths, Alloys and Sizes Available Upon Request.
All Weights Shown Are Approximate Weights. -
Made to Order Special Sizes and Alloys are Available Upon Request, Please Inquire.
Other Lengths Available Upon Request.
Typical Properties:
C93200 (SAE 660) Bronze Bars Chemical Composition.......- Copper....... 81.0 - 85.0%
- Tin..............6.3-7.5%
- Lead...........6.0-8.0%
- Zinc ...........2.0-4.0%
Tensile Strength.......................35,000 PSI
Yield Strength.................................20,000 PSI
Elongation in 2 inches......................10%
Brinell Number at 500 KG Load.........65
Comparable Alloy Specifications:......C93200; SAE 660
Common Continuous Cast Manufacturing Specifications: ASTM B505;QQ-C 390B, Type III
Not to be used for specification purposes.
Nominal Stock Allowances:
O.D. up to 4".........1/32" I.D. and O.D.
O.D. 4" to 5"..........1/16" I.D. and O.D.
O.D. 5" +...............3/32" I.D. and O.D.