Print Back
A shape is classed a "Bar Size Shape" when its greatest dimension (length excluded) is less than 3 inches.

The shapes listed in this section conform to ASTM A 36, a standard specification for structural steel.

ASTM Specification A 36

Stocked Lengths 20' , 30', & 40' as indicated
Unit of Measure

Specifications

A

N/A 2 1/2 in

B

N/A 1.500 in

C

N/A 5/16 in

Estimated Weight per Foot

N/A 3.92 lb

Estimated Weight 20-Ft. Length

N/A 78.4 lb

Estimated Weight 30-Ft. Length

N/A 117.6 lb

Estimated Weight 40-Ft. Length

N/A 156.8 lb

Analysis

N/A Carbon .26 Max.
Phosphorus .04 Max.
Sulphur .05 Max.

Applications

N/A For use in riveted, bolted, or welded construction of bridges and buildings, and for general structurals purposes.

Mechanical Properties

N/A ASTM A 36 requirements are:
Tensile Strength - 58.000/80.000 psi
Yield Point - 36,000 Min. psi
Elongation in 8" - 20% Min. (Subject to a deduction from trie above percentage of elongation for thicknesses under 5/16" and over 3/4".)

Weldability

N/A These shapes are easily welded by all the welding processes, and the resultant welds and joints are of extremely high quality. The grade of welding rod to be used depends on thickness of section, design, service requirements, etc.